
Dr. Siti Azrah
Lecturer
Universiti Sains Malaysia · Malaysia
Liquid phase deposition film of tin oxide
AbstractThe thin film of tin oxide was formed in the solution containing 0.005–0.3 molrl SnF . The procedure of film formation
2
was very simple; the solution, in which a substrate is immersed, is maintained above 408C for tens of hours. In this method,
the hydrolysis product of SnF deposited as the film on a substrate. As-deposition film included 6–16 mol% fluorine. The
2
chemical component was deduced as $SnO
2y05x x$
F , where 0.17-=-0.5. The film was modified to pure SnO by heating
2
above 3008C. The electrical conductivity was improved to 1.4=10y2 V cm by heating at 5008C. The model of liquid
phase deposition was proposed to extend another oxide film
The thin film of tin oxide has been utilized for
wide application such as transparent conductive film
and infrared cutting filter. The various methods,
SnO film, the film formation has been obtained by
2
maintaining the H SnF solution supersaturated with
2 6
SnO at 358C. The supersaturation was attained by
2
addition of a small amount of H BO or SnCl into
spraying thermal decomposition 1 , sputtering 2 ,
w x
w x
2 6
3 3 4
H SnF solution prepared by dissolving stannous
w x
chemical vapor deposition 3 and sol–gel 4–6 ,
have been developed to produce the tin oxide film.
w x
The liquid phase deposition method so-called
Ž
.
LPD method is a new technique to produce the thin
w x
film. Nagayama et al. 7 succeeded in forming the
silica film by LPD method. In this method, silica is
deposited on a substrate by the addition of H BO
3 3
into the H SiF solution saturated with SiO . The
2 6
2
LPD method has been extended to another oxide
film in their pioneering work. For example, TiO2
and SnO films were obtained by a similar method
2
using the solution systems of H TiF qHBO 8
w x
2 6 3 3
w x
and H SnF qH BO 9 respectively. In the case of
2 6 3 3
)Corresponding author. Fax: q81-298 501 044.
PII S0022-3093 96 00583-2
oxide into HF solution.
These previous studies seem to be done in the
general manner, that is, the deposition components
are the reaction product between MF2y ion and
6
additives or the precipitation product from the super
saturating H MF solution with metal oxide. It is
2 6
expected that these reactants or precipitates should
include considerable amount of fluorine, and may be
written as MO
Ž .
2y0.5x x
OH, F . We considered that
this intermediate product with fluorine should play
an essential role on the deposition phenomena. In
this study, the simple reaction, hydrolysis of metal

